- Active Pickup with Preamp
- For Selmer/Maccaferri Gypsy Jazz Guitars
- Prewired 1/4" Endpin Jack Preamp
- Two Year Warranty
- Made in Canada
Note: This is the very latest model of the HFN pickup that has the new ABS base. This replaces the original model that had a rosewood base. The new ABS base transfers more resonance from the soundboard to the pickup sensor, which provides increased clarity and detail, along with slightly higher output.
The Schatten HFN-S2 Active Guitar Pickup is a high quality piezo transducer with a prewired endpin jack preamp designed for internal installation on Selmer/Maccaferri Gypsy Jazz guitars. This pickup is specifically designed to fit most Selmer/Maccaferri models, including Hawaienne, Espagnol, Concert, Orchestre, Tenor 4 Cordes, and Jazz, both petite bouche (small oval soundhole) and grande bouche (large D soundhole).
"The sound of this new guitar pickup is as close to that of a good quality mic as you've ever heard from a guitar pickup..."
The Schatten HFN-S2 pickups give you a sound that is much more realistic than that of under-the-saddle pickups and is quite close to the sound of a good microphone. Along with being simple to install, the HFN-S2's have excellent feedback rejection and good string-to-string balance. There is nothing artificial about the sound of the HFN-S2 and it does not have the usual compressed 'quackiness' inherent in most undersaddle pickup systems.
The HFN-S2 will fit virtually all Selmer style instruments with 'normal' Selmer style bracing. The standard Selmer bracing has the 2 main transverse braces set at 1.9" apart, center to center and the bracing thickness averaging between 0.300" to 0.350". The HFN-S2 pickup is designed to fit this set of standard design parameters.
The HFN-S2 is not designed to fit Favino style instruments when those instruments use a Favino brace spacing that puts the 2 main transverse braces 2.9" apart, center to center. The HFN-S2 also will not fit the new MM series from Aria. The 2 main transverse braces on these instruments is approximately 2.56" apart.
Note: A two piece tool kit (part #S2-TOOLKIT) is available separately for installing the pickup into instruments having the smaller soundholes (petite bouche). Larger soundhole and D shaped soundhole (grande bouche) instruments do not need the tool kit as the opening in these instruments is easily large enough to get one's hand in.
The HFN-S2 Active pickup system includes the high quality Player single channel preamp built right into the endpin jack. The Player preamp increases the signal strength and allows the HFN-C pickup to be plugged directly into any amp, mixer or PA system. A trim pot on the circuit board allows setting the output gain to match your system.