- Professional Microphone System for Accordion
- Twin Mics for Treble
- Dedicated Bass Mic
- Dual Channel Belt-clip Preamp
- Easy to Install and Remove
- Made in USA
The K&K Sound Accordion Microphone System consists of three miniature gooseneck mics and a two-channel preamp. Two microphones are connected to one 1/4" plug -- these twin mics are for the treble side. Another single mic with a separate 1/4" plug is used for the bass side of the accordion.
The included two-channel, belt-clip K&K preamp has been specially designed for use with this system. This preamp allows for bass/middle/treble EQ for the treble and bass side individually, as well as separate volume and gain controls.
The mics attach with the self-adhesive "dual-lock" fastening system mounted to the base of their goosenecks. This dual-lock is an industrial-strength hook-and-loop fastener, and will never wear out from repeated opening and closing.
Treble mics (twin mics): one on the upper and the other one on the lower end of the treble grill. Both mics are technically identical but they have different cable length. Position the mic with the longer cable in the upper position (which are the lower tone keys) and the one with the shorter cable on the higher key position. You may have to experiment to find the best locations. We recommend to aim the mics towards the grill with about 2" distance between Hic Head and grill. Mount them in a way that the mic heads end up being about 10 to 12 inches apart. Plug the treble mics into the Input 1 jack on the preamp.
Bass mic: on the lower edge of the bass side also pointing towards the grill with about 3" distance. Make sure that it is not in the way of your hand. Plug the bass mic into the Input 2 jack on the preamp.
Note: This is a special order item, please call to order.